Errors & Resolutions

Errors & Resolutions

All operators should try to restart their nodes and should check if they are on the latest stable version before attempting anything other configuration change. You can restart and update with the following commands:

docker compose down
git pull
docker compose up

You can check your logs using

docker compose logs

ENRs & Keys

How do I get my ENR if I want to generate it again?

cd to the directory where your private keys are located (ex: cd /path/to/charon/enr/private/key)

Run docker run --rm -v "$(pwd):/opt/charon" obolnetwork/charon:v1.4.0 enr. This prints the ENR on your screen.

What do I do if lose my charon-enr-private-key?

For now, ENR rotation/replacement is not supported, it will be supported in a future release. Therefore, its advised to always keep a backup of your charon-enr-private-key in a secure location (ex: cloud storage, USB Flash drive, etc.).

I can't find the keys anywhere

The charon-enr-private-key is generated inside a hidden folder .charon. To view it, run ls -al in your terminal. This step may be a bit different for Windows. Else, if you are on macOS, press Cmd + Shift + . to view the .charon folder in the Finder application.

Lighthouse

Lighthouse says "downloading historical blocks"

This means that Lighthouse is still syncing which will throw a lot of errors down the line. Wait for the sync before moving further.

Lighthouse gives the error failed to request attester duties

This indicates there is something wrong with your Lighthouse beacon node. This might be because the request buffer is full as your node is never starting consensus since it never gets the duties.

Lighthouse gives the error not enough time for a discovery seach

This could be linked to a internet connection being too slow or relying on a slow third-party service such as Infura.

Beacon Node

Error communicating with Beacon Node API & Error while connecting to beacon node event stream

This is likely due to Lighthouse not done syncing, wait and try again once synced. Can also be linked to Teku keystore issue.

Clock sync issues

Either your clock server time is off, or you are talking to a remote beacon client that is super slow (this is why we advise against using services like Infura).

My beacon node API is flaky with lots of errors and timeouts

A good quality beacon node API is critical to validator performance. It is always advised to run your own beacon node to ensure low latencies to boost validator performance. Using 3rd party services like Infura's beacon node API has significant disadvantages since the quality is often low. Requests often return 500s or timeout. This results in lots of warnings and errors and failed duties. Running a local beacon node is always preferred.

Charon Errors

Can't connect to Beacon API

If you are running EL and CL outside Obol on the same machine, you might need to open ports in your firewall to allow connections incoming from the docker instance. In order to know the IP of the docker network, run:docker network inspect <NETWORK ID>

Attester failed in consensus component

The required number of operators defined in your cluster-lock file is probably not online to sign successfully. Make sure all operators are running the latest version of Charon. To check if some peers are not online:docker logs charon-distributed-validator-node-charon-1 2>&1 | grep 'absent'

Load private key

Make sure you have successfully run a DKG before running the node. The key should be created and placed in the right directory during the ceremony. Also, make sure you are working in the right directory:charon-distributed-validator-node.

Failed to confirm node connection

Wait for Teku & Lighthouse sync to be complete.

Reserve relay circuit: reservation failed

RESERVATION_REFUSED is returned by the libp2p relay when some maximum limit has been reached. This is most often due to "maximum reservations per IP/peer". This is when your Charon node is restarting or in some error loop and constantly attempting to create new relay reservations reaching the maximum.

To fix this error, stop your Charon node for 30mins before restarting it. This should allow the relay enough time to reset your IP/peer limits and should then allow new reservations. This could also be due to the relay being overloaded in general, so reaching a server wide "maximum connections" limit. This is an issue with relay scalability and we are working in a long term fix for this.

Error opening relay circuit: NO_RESERVATION

Error opening relay circuit NO_RESERVATION (204)` indicates the peer isn't connected to the relay, so the the Charon client cannot connect to the peer via the relay. That might be because the peer is offline or the peer is configured to connect to a different relay.

To fix this error, ensure the peer is online and configured with the exact same --p2p-relays flag.

Couldnt fetch duty data from the beacon node

msgFetcher indicates a duty failed in the fetcher component when it failed to fetch the required data from the beacon node API. This indicates a problem with the upstream beacon node.

Couldnt aggregate attestation due to failed attester duty

msgFetcherAggregatorNoAttData indicates an attestation aggregation duty failed in the fetcher component since it couldn't fetch the prerequisite attestation data. This indicates the associated attestation duty failed to obtain a cluster agreed upon value.

Couldnt aggregate attestation due to insufficient partial v2 committee subscriptions

msgFetcherAggregatorZeroPrepares indicates an attestation aggregation duty failed in the fetcher component since it couldn't fetch the prerequisite aggregated v2 committee subscription. This indicates the associated prepare aggregation duty failed due to no partial v2 committee subscription submitted by the cluster validator clients.

Couldnt aggregate attestation due to failed prepare aggregator duty

msgFetcherAggregatorFailedPrepare indicates an attestation aggregation duty failed in the fetcher component since it couldn't fetch the prerequisite aggregated v2 committee subscription. This indicates the associated prepare aggregation duty failed.

Couldnt propose block due to insufficient partial randao signatures

msgFetcherProposerFewRandaos indicates a block proposer duty failed in the fetcher component since it couldn't fetch the prerequisite aggregated RANDAO. This indicates the associated randao duty failed due to insufficient partial randao signatures submitted by the cluster validator clients.

Couldnt propose block due to zero partial randao signatures

msgFetcherProposerZeroRandaos indicates a block proposer duty failed in the fetcher component since it couldn't fetch the prerequisite aggregated RANDAO. This indicates the associated randao duty failed due to no partial randao signatures submitted by the cluster validator clients.

Couldnt propose block due to failed randao duty

msgFetcherProposerZeroRandaos indicates a block proposer duty failed in the fetcher component since it couldn't fetch the prerequisite aggregated RANDAO. This indicates the associated randao duty failed.

Consensus algorithm didn't complete

msgConsensus indicates a duty failed in consensus component. This could indicate that insufficient honest peers participated in consensus or p2p network connection problems.

Signed duty not submitted by local validator client error

msgValidatorAPI indicates that partial signature were never submitted by the local validator client. This could indicate that the local validator client is offline, or has connection problems with Charon, or has some other problem. See validator client logs for more details.

Bug: partial signature database didn't trigger partial signature exchange

msgParSigDBInternal indicates a bug in the partial signature database as it is unexpected.

No partial signatures received from peers

msgParSigEx indicates that no partial signature for the duty was received from any peer. This indicates all peers are offline or p2p network connection problems.

Insufficient partial signatures received, minimum required threshold not reached

msgParSigDBThreshold indicates that insufficient partial signatures for the duty was received from peers. This indicates problems with peers or p2p network connection problems.

Bug: threshold aggregation of partial signatures failed due to inconsistent signed data

msgSigAgg indicates that BLS threshold aggregation of sufficient partial signatures failed. This indicates inconsistent signed data. This indicates a bug in Charon as it is unexpected.

Existing private key lock file found, another charon instance may be running on your machine

When you turn on the --private-key-file-lock option in Charon, it checks for a special file called the private key lock file. This file has the same name as the ENR private key file but with a .lock extension. If the private key lock file exists and is not older than 5 seconds, Charon won't run. It doesn't allow running multiple Charon instances with the same ENR private key. If the private key lock file has a timestamp older than 5 seconds, Charon will replace it and continue with its work. If you`re sure that no other Charon instances are running, you can delete the private key lock file.

Validator api 5xx response: mismatching validator client key share index, Mth key share submitted to Nth charon peer

The issue revolves around an invalid setup or deployment, where the validators private key shares don't match the ENR private key. There may have been a mix-up during deployment, leading to a mismatching validator client key share index.

For example:Imagine node N is Alice, and node M is Bob, the error would read:mismatching validator client key share index, Bobs key share submitted to Alices charon node Bobs private key share(s) are imported to a VC that is connected to Alices Charon node. This is a invalid setup/deployment. Alices Charon node should only be connected to Alices VC.

Check the partial public key shares of each node inside cluster-lock.json and see that matches with the public key insidenode(num)/validator_keys/keystore-0.json.

Grafana

How to fix the Grafana dashboard?

Sometimes, Grafana dashboard doesn't load any data first time around. You can solve this by following the steps below:

• Click the Wheel Icon > Datasources.

• Click prometheus.

• Change the "Access" field from Server (default) to Browser. Press "Save & Test". It should fail.

• Change the "Access" field back to Server (default) and press "Save & Test". You should be presented with a green success icon saying "Data source is working" and you can return to the dashboard page.

N/A & No data in validator info panel

Can be linked to a Teku keystore issue.

Prometheus

Unauthorized: authentication error: invalid token

You can ignore this error unless you have been contacted by the Obol Team
with monitoring credentials. In that case, follow [Monitoring your Node](../../run/running/monitoring.md) in our guides. It does not affect cluster performance or prevent the cluster from running.

Docker

How to fix permission denied errors?

Permission denied errors can come up in a variety of manners, particularly on Linux and WSL for Windows systems. In the interest of security, the charon docker image runs as a non-root user, and this user often does not have the permissions to write in the directory you have checked out the code to. This can be generally be fixed with some of the following:

• Running docker commands with sudo, if you haven't setup docker to be run as a non-root user
• Changing the permissions of the .charon folder with the commands:

  • mkdir .charon (if it doesn't already exist);

  • sudo chmod -R 666 .charon.

I see a lot of errors after running docker compose up

It`s because both Nethermind and Lighthouse start syncing and so there's
connectivity issues among the containers. Simply let the containers run for
a while. You won't observe frequent errors when Nethermind finishes syncing. You
can also add a second beacon node endpoint for something like Infura by
adding a comma separated API URL to the end of
`CHARON_BEACON_NODE_ENDPOINTS` in the docker-compose.yml.

How do I fix the plugin "loki" not found error?

If you get the following error when calling docker compose up:

Error response from daemon: error looking up logging plugin loki: plugin "loki" not found.

Then it probably means that the Loki docker driver isn't installed. In that case, run the following command to install loki:

docker plugin install grafana/loki-docker-driver:latest --alias loki --grant-all-permissions.

Relay

Resolve IP of p2p external host flag: lookup replace.with.public.ip.or.hostname:no such host

Replace replace.with.public.ip.or.hostname in the relay/docker-compose.yml with your real public IP or DNS hostname.

Timeout resolving bootnode ENR: context deadline exceeded

The relay you are trying to connect to your peers via is offline or unreachable.